| Articles:
Buyer's Guide - Solid Body Electric Guitars |
In this article I'm going to teach you to make an educated
choice when it comes to buying an electric guitar. We'll take a look at the different
kinds of electric guitar features you can expect to see. My aim is not to push you towards
a particular make or style of guitar, but rather enable you to choose the instrument which
best suits your needs.
Neck Joint
There are three common methods of joining an electric guitar neck to it's body.
The method employed can have a large effect on the sound of the instrument. The
method affects the sustain (the length of time a note will ring after being struck), as
well as the tone.
 |
Bolt-on - Pioneered by Fender
in the 1950's, the bolt-on neck is fixed to the body by means of four screws.
Pros: Cheaper, easy to replace
Cons: access to upper frets more difficult
Tone: Less bass
Sustain: Shorter sustain
Examples: Fender Telecaster, Fender Stratocaster |
 |
Glue-in - The
end of the neck is shaped to exactly fit a slot in the body and the joint is glued in
permanently
Pros: Can make access to upper frets easier
Cons: More difficult to repair, more expensive to manufacture
Tone: Better bass response
Sustain: More sustain
Examples: Gibson Les Paul, |
 |
Through-neck - The neck
continues all the way to the end of the body. The concept is that both ends of the string
are connected to the same piece of wood.
Pros: Excellent access to upper frets, very comfortable
Cons: Very difficult to make and repair, very expensive, quite rare
Tone: Very good bass and treble response, excellent harmonics
Sustain: Excellent sustain
Examples: BC Rich, Jackson, various Japanese guitars |
Pickups
Pickups are covered in depth here.
Single-coil Pickups (e.g. Fender Standard)
The simplest type of pickup, with one wire coil surrounding the magnet structure.
Commonly seen on the Fender Stratocaster and similar guitars. This type of pickup
generally has a more trebly sound with more 'snap' and 'punch'. Generally have a lower
power output. Tends to be susceptible to picking up hum from transformers and computer
monitors. Consider a guitar with single-coils if you want less power, more twang.
Humbuckers (e.g.
Gibson PAF)
A bit more complex, with two coils and sets of magnets in a clever arrangement
which cancels out most of the hum that the coils pick up. They are more powerful than
single coil pickups, with a bassier, smoother sound. Due to the fact that you have two
coils and four wires to play with, humbuckers give a variety of wiring (and thus sound)
options. Some of the more modern humbuckers are made full-size but are designed to sound
more like single-coils. Choose a guitar with humbuckers if you are looking for a powerful
sound, or a warmer one.
 |
Pickup Configurations
The combinations of pickups on a guitar dictate the range of sound available from
the instrument the three most common are shown here. Three single coils - Quite flexible
with a good range of five sounds. Two humbuckers - Less flexible (only three basic
sounds), but higher powered sound. Two single-coil, one humbucker - is the most flexible
all-rounder. |
| Bridges |
 |
Fixed Bridges
Fixed bridges are unmoveable fixed directly onto the body with little to no cavity
routed out below them. This means they have more sustain and tone and tuning can be
stable. Ideally, the strings need to go through the body, rather than terminate at the
bridge itself - once again more tone. |
 |
Tremolos
Are designed to move, changing the pitch of the notes played. Originally designed
to give a subtle wavering to the sound, with a lowering of the pitch when used, with very
little 'pullback' (raising of pitch). Will
often make the guitar go out of tune when used aggressively - due to strings sticking at
the nut or bridge itself. |
 |
Locking Tremolos
Similar to standard tremolos, but lock the strings in place so that tuning is very
stable, regardless of how aggressively they are used. Usually also fitted with a locking
nut to further enhance tuning stability. Have to have tuners built in to compensate for
the loss of tuning ability due to the locking nut. Have lots of lowering and pullback. However, they make it very difficult to change strings and tune before
locking. Also, if a string breaks while playing, the rest of the strings go far out of
tune (which is why guitarists who use these professionally have a backup guitar at hand). |
Headstock Shapes
The shape of a headstock does not make any difference to tone, but is
often a personal choice. The one thing I do insist on is that the strings run in a
straight line from the bridge to the tuners - it makes for better tuning. Take a look at
the middle headstock in the pic on the left - the strings fan out from the nut, creating
friction at the nut. In fact, the first string will not even stay in the nut unless a
locking nut is used.
Fingerboard
The fingerboard (sometimes called the fretboard) is the playing surface of a neck
where the frets are. There are two important factors with a fingerboard - the radius and
the type of wood.
 |
Fingerboard radius - is the
shape of the fingerboard. It's usually a personal preference, but quite simply, the
smaller radius (which is more curved) is better for playing chords, while a flatter radius
is better for single-note playing. |
 |
Type of Wood - the type of
wood will have an impact on the playability and the sound of the guitar. There are three
common woods: ebony, maple and rosewood. Ebony is a dark brown, almost black wood. Very
hard, smooth and fast feeling that has a bright, long sustaining tone. Chocolate brown or
dark grey streaks are not uncommon. Maple is dense, hard and strong, offering great
sustain and lots of attack. The tone is bright. Rosewood is the most popular fingerboard
wood. A very hard and dense wood. Great clarity and articulation in tone. Very smooth
feeling. It has a warm "rock 'n roll" tonality. |
The Body
Body Shapes
Body shapes are not just cosmetic - some elements of the shape will assist in playability
or comfort, namely:
- Cutaways - if the body is cutaway where the neck joins the
body, it helps to access the upper frets of the neck.
- Body contour - when the body is sculpted to make it fit more
comfortably with the human body. A good example is a Fender Stratocaster, which is
contoured at the back for the chest and on the front for the right forearm
- Balance - A good body shape will be balanced, weight-wise so
it sits well without
- Weight - the larger or thicker bodies can be heavy, making
them tiring to play
Body Woods
Looks: Each piece of wood is unique. Even within a species, each piece is
going to differ from the next. The grain pattern, colour, shade, weight, and density are
all subject to mother nature's whims. This does not necessarily make one piece better or
worse than another. It means that they are simply different and unique.
Sound: The sonic properties of wood vary dramatically
between species, weight and density. Generally speaking, the heavier woods sustain well
and have a bright and articulate sound which are all good attributes for a bass guitar.
Extra light weight woods, while a great complement for a bad back, can sound indistinct or
muddy especially with humbucking pickups. Medium weight woods fall in the middle and are
the traditional preference.
Weight: Denser woods such as maple and mahogany weigh more,
while less dense woods such a poplar, alder and ash make for a lighter guitar. |